-
Step 1: Measure and plan the layout of your patio
-
Step 2: Before you start digging, get ready to remove about 10 inches of soil using a level
-
Step 3: Fill the dug hole with 4 – 6 inches of crushed stone
-
Step 4: Distribute the crushed stone and level the base.
-
Step 5: On the top, add 1 or 2 inches of sand.
-
Step 6: Divide the whole area into 2 halves and level each of them.
-
Step 7: Make sure that the level of the sand is correct, as this will have an effect on the final look of your patio
-
Step 8: Start laying the patio pavers.
-
Step 9: Lay all the patio pavers in the same direction.
-
Step 10: Level the circles.
-
Step 11: Sweep some sand into the space between the stones to keep them still.
-
Step 12: Before you start placing the fire pit blocks, level the base.
-
Step 13: Glue the blocks with some cement or landscaping adhesive.
-
And here it is – your very own fire pit!
-
Step 14: Sweep away the sand that was used for holding the pavers and spread some polymeric sand.
-
At last, the fully finished patio area with a fire pit.
-
Click on the thumbnail above to view the larger image.